This product is no longer available.
| Services Available | |
|---|---|
| Free Support | Yes |
Overview
The CM220 right-angle mounting bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a crossarm. It is compatible with pipes that have a 1- to 1.5-inch outer diameter. (For more information, refer to the Compatibility information.) The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 Nu-Rail Offset Crossover fitting.
Read MoreImages
Detailed Description
The CM220 consists of a rectangular bracket and two 1.5 in. U-bolts.
The CM220 Right-Angle Mounting Bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a CM202, CM204, or CM206 crossarm. It is compatible with pipes that have a 1.0" to 1.5" outer diameter.
The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 NU-RAIL Offset Crossover fitting.
Specifications
| U-bolt and Washer Material | 304 stainless steel (not passivated) |
| Bracket Material | 12 gage, 304 stainless steel (not passivated) |
| Dimensions | 5.74 x 5.74 x 7.62 cm (2.25 x 2.25 x 3 in.) |
| Weight | 0.29 kg (0.65 lb) |
Compatibility
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Sensors
| Product | Compatible | Note |
|---|---|---|
| 014A-L | ||
| 03002-L | ||
| 034B-L | ||
| 05103-45-L (retired) | ||
| 05103-L | ||
| 05106-L (retired) | ||
| 05305-L | ||
| 27106T-L | ||
| 52202-L | ||
| CSAT3 (retired) | ||
| SI-111 (retired) | ||
| SR50A-L (retired) | ||
| WINDSONIC-L (retired) | ||
| WXT520 (retired) |
Additional Compatibility Information
Sensors
The CM220 is compatible with sensors that have a 0.75 to 1 in. IPS (1 to 1.5 in. OD) pipe mount.
Pipe
The CM220 is compatible with user-supplied pipe that has a 0.75 to 1 in. IPS (1 to 1.5 in. OD).
Peripherals
The CM220 can be used to mount the 17992 GPS antenna and the 27084 CVF3 Mounting Stand.
Listed Under
- SI-111-PW - Infrared Radiometer for Prewired Enclosures
- SI-111 - Infrared Radiometer with Standard Field of View
- VU01-L - Ventilation Unit for SR20-T2-L and SR20-D2-L
- WXT510 - Weather Transmitter
- 03001-L - R. M. Young Wind Sentry Set
- 03001-LC - R. M. Young Wind Sentry Set for CS110 or MetData
- P2546D-L - Three-Cup Anemometer with MEASNET Calibration (electronic version)
- CS800-L - Climatronics Wind Set
- 034B-LC - Met One Wind Set for CS110 or MetData1
- 05305-LC - Wind Monitor AQ for CS110 or MetData1
- P2546A-L - Three-Cup Anemometer with MEASNET Calibration
- SI-111SS - Infrared Radiometer with Standard Field of View
- SR50-LC - CSC Ultrasonic Distance Sensor (-45° to +50°C) for MetData1
- 27084 - CVF3 Mounting Stand
- CVF3-L - Ventilation Unit for Pyranometers
- P2546C-L - Three-Cup Anemometer with MEASNET Calibration (coil version)
- SR50-L - Ultrasonic Distance Sensor
- TX312 - High Data Rate GOES Transmitter
- 52202-L - Electrically Heated Rain and Snow Gage
- 05108-45-L - Wind Monitor-HD, Alpine Version
- 05305-L - RM Young Wind Monitor AQ
- 05103-L - Wind Monitor
- 03101-L - Wind Sentry Anemometer
- 034B-L - Wind Set
- 03002-L - Wind Sentry Set
- 27106T-L - Vertical Propeller Anemometer
- 020C-L - Wind Direction Sensor
- CVF4-L - Ventilation Unit for Pyranometers
- 05108-L - Wind Monitor-HD
- 024A-L - Wind Direction Sensor
- 014A-L - 3-Cup Anemometer
- #40C - Maximum Wind Speed Sensor
- CM202 - 2 ft Crossarm with One CM210 Mounting Kit
- SR50AH-L - Heated Sonic Distance Sensor
- SR50AT-L - Sonic Distance Sensor with Temperature Sensor
- CM206 - 6 ft Crossarm with One CM210 Mounting Kit
- CM204 - 4 ft Crossarm with One CM210 Mounting Kit
- SR50ATH-L - Sonic Distance Sensor with Heater and Temperature Sensor
- CM203 - 3 ft Crossarm with One CM210 Mounting Kit
- 17992 - 28 dBi 3.3 V active GPS Antenna without Cable
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences