Overview
The CM216 provides both a 3/4-inch IPS (1.05-inch OD) and a 1-inch IPS (1.32-inch OD) mounting pipe that extends 4 inches above the mast. They are pipes with an adapter that bolts to the inside of the top of a CM106B tripod; a stainless-steel CM110, CM115, or CM120 tripod; or a CM300, CM305, or CM310 mounting pole. A sensor with a 1.05- or 1.32-inch OD fitting (typically a wind sensor or the R. M. Young rain/snow gage) can then be mounted on this pipe.
Read MoreImages
Detailed Description
Note: The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
Specifications
| Reach | Extends 10 cm (4 in.) above the mast |
| Outer Diameter | 2.67 to 3.34 cm (1.05 to 1.315 in.) |
| Pipe Size | 1.9 to 2.54 cm (0.75 to 1 in.) IPS |
| Dimensions | 20.32 x 7.62 x 5.08 cm (8 x 3 x 2 in.) |
| Weight | 952.54 g (2.1 lb) |
Compatibility
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Mounting Equipment
| Product | Compatible | Note |
|---|---|---|
| CM10 (retired) | ||
| CM106 (retired) | ||
| CM106B | ||
| CM110 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
| CM115 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
| CM120 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
| CM6 (retired) |
Additional Compatibility Information
Wind Sensor Considerations
A lightning rod cannot be used when this mount attaches a Wind Monitor or a 03002 Wind Sentry atop the tripod’s mast. Therefore the CM216 is only recommended for mounting a Wind Monitor or 03002 if the deployment is short-term.
Sensors
The CM216 is compatible with sensors that have a 0.75 or 1 in. size (1 or 1.32 in. OD) pipe mount.
Documents
Listed Under
- CM120 - 20 ft Stainless-Steel Tripod with Grounding and Guy Kit
- CM115 - 15 ft Stainless-Steel Tripod with Grounding and Guy Kit
- CM110 - 10 ft Stainless-Steel Tripod with Grounding Kit
- 03001-LC - R. M. Young Wind Sentry Set for CS110 or MetData
- CS800-L - Climatronics Wind Set
- 034B-LC - Met One Wind Set for CS110 or MetData1
- 05305-LC - Wind Monitor AQ for CS110 or MetData1
- 03001-L - R. M. Young Wind Sentry Set
- CM305 - 47 in. Mounting Pole with Cap
- CM300 - 23 in. Mounting Pole with Cap
- CM310 - 56 in. Mounting Pole with Cap
- 52202-L - Electrically Heated Rain and Snow Gage
- 014A-L - 3-Cup Anemometer
- 05305-L - RM Young Wind Monitor AQ
- 05103-L - Wind Monitor
- 03101-L - Wind Sentry Anemometer
- 034B-L - Wind Set
- 03002-L - Wind Sentry Set
- 05108-L - Wind Monitor-HD
- 024A-L - Wind Direction Sensor
- 05108-45-L - Wind Monitor-HD, Alpine Version
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences