TE525-ET Rain Gage with 6 in. Orifice for ET Station

Overview

The TE525-ET, manufactured by Texas Electronics, has a 6 in. orifice and measures rainfall in 0.01 in. increments. The TE525-ET funnels precipitation into a bucket mechanism that tips when filled to a calibrated level.

Read More

The "-ET" version of this product has a cable that terminates in a connector (instead of pigtails) and is the ideal length for attachment to an ET106 or ET107 Weather Station.

Images

Detailed Description

For this version of the TE525 tipping bucket rain gage, the cable terminates in a connector and is the ideal length for attachment to the ET107 or ET106 ETo Weather Station. The TE525-ET has a 6" orifice and measures rainfall in 0.01 inch increments. The TE525-ET funnels precipitation into a bucket mechanism that tips when filled to when filled to a calibrated level.

Specifications

Sensor Type Tipping bucket/magnetic reed switch
Material Anodized aluminum
Temperature 0° to 50°C
Resolution 1 tip
Volume per Tip 4.73 ml/tip (0.16 fl. oz/tip)
Rainfall per Tip 0.254 mm (0.01 in.)
Accuracy 1.0% up to 2 in./h (50 mm/h)
Cable 2-conductor shielded
Funnel Collector Diameter 15.4 cm (6.06 in.)
Height 24.1 cm (9.5 in.)
Cable Length 139.7 cm (55 in.)
Tipping Bucket Weight 0.9 kg (2.0 lb)
Cable Weight 0.1 kg (0.2 lb) per 3.05 m (10 ft) length

Compatibility

For this version of the TE525 tipping bucket rain gage, the cable terminates in a connector and is the ideal length for attachment to the ET107 or ET106 ETo Weather Station.

Frequently Asked Questions

Number of FAQs related to TE525-ET: 5

Expand AllCollapse All

  1. If a sensor automatically ships with a calibration sheet, what information is included on it?

    The information included on a calibration sheet differs with each sensor. For some sensors, the sheet contains coefficients necessary to program a data logger. For other sensors, the calibration sheet is a pass/fail report.

  2. What are the different cable length choices available for Campbell Scientific sensors?

    Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system:

    • An –LC model has a user-specified cable length for connection to an ET107, CS110, or retired Metdata1.
    • An –LQ model has a user-specified cable length for connection to a RAWS-P weather station.

    If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. The cable length is listed at the end of the Description field in the product’s Ordering information. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails.

    If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model designates the sensor as a 034B for an ET107 system.

    • –ET models terminate with the connector for an ET107 weather station.
    • –ETM models terminate with the connector for an ET107 weather station, but they also include a special system mounting, which is often convenient when purchasing a replacement part.
    • –QD models terminate with the connector for a RAWS-F Quick Deployment Station.
    • –PW models terminate with the connector for a PWENC or pre-wired system.
  3. Where are the available cable termination options listed for a particular sensor?

    Not every sensor has different cable termination options. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page:

    • Model number
    • Cable Termination Options list

    If a sensor is offered in an –ET, –ETM, –LC, –LQ, or –QD version, that option’s availability is reflected in the sensor model number. For example, the 034B is offered as the 034B-ET, 034B-ETM, 034B-LC, 034B-LQ, and 034B-QD.

    All of the other cable termination options, if available, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page.

    Note: As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model. 

  4. If the original calibration sheet gets lost, can another copy be requested?

    This depends on the information contained in the calibration sheet:

    • If the calibration sheet contains coefficient information, Campbell Scientific keeps a copy, and a replacement copy can be requested.
    • If the calibration sheet does not contain coefficients, Campbell Scientific does not keep a copy. It may be possible to contact the original manufacturer for a replacement copy.
  5. What are the different cable termination options available for Campbell Scientific sensors?

    Many Campbell Scientific sensors are available with different cable termination options. These options include the following:

    • The –PT (–PT w/Tinned Wires) option is the default option and does not display on the product line as the other options do. The cable terminates in pigtails that connect directly to a data logger.
    • In the –C (–C w/ET/CS110 Connector) option, the cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station.
    • In the –CWS (–CWS w/CWS900 Connector) option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows the sensor to be used in a wireless sensor network.
    • In the –PW (–PW w/Pre-Wire Connector) option, the cable terminates in a connector that attaches to a prewired enclosure.
    • In the –RQ (–RQ w/RAWS Connector) option, the cable terminates in a connector that attaches to a RAWS-P Permanent Remote Automated Weather Station.

    Note: The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.

Visit the FAQ Library

Listed Under

Other Accessory for the following products:
Replacement Part for the following products:

Privacy Policy Update

We've updated our privacy policy.  Learn More

Cookie Consent

Update your cookie preferences.  Update Cookie Preferences