Services Available | |
---|---|
Repair | No |
Calibration | No |
Free Support | No |
The RF304 is a DRL UHF radio transceiver that is programmed to an exact user-specified frequency by Campbell Scientific using special software.
Read More
The RF300-series are radio transceivers used in Campbell Scientific radiotelemetry networks. The following table shows the frequency ranges assigned to each model.
Model | Type | Frequency |
RF300 | VHF | 150 to 174 MHz |
RF301 | VHF | 132 to 150 MHz |
RF302 | UHF | 450 to 470 MHz |
RF303 | UHF | 403 to 419 MHz |
RF304 | UHF |
419 to 435 MHz |
These transceivers meet NTIA narrowband and FCC re-farming requirements for transmission.
The RF304 is a Dataradio 3412 UHF radio transceiver that is programmed to an exact user-specified frequency by Campbell Scientific using special software.
Besides the radio, each field station and repeater station must also have an RF500M Radio Modem or RF95(A) Radio Modem; base stations need an RF500M radio modem, RF500B base station, or RF232(A) base station.
Power Output | 5 W (at 13.3 V nominal) |
Frequency Control | Synthesized |
Channel Spacing | 12.5/25 kHz |
Operation Voltage |
|
Current Drain |
|
Operating Temperature | -30° to +60°C |
Humidity | 95% maximum RH at 40°C (non-condensing) |
Dimensions | 11.7 x 8.4 x 5.6 cm (4.6 x 3.3 x 2.2 in.) |
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Product | Compatible | Note |
---|---|---|
21X (retired) | ||
CR10 (retired) | ||
CR1000 (retired) | ||
CR10X (retired) | ||
CR200X (retired) | ||
CR206X (retired) | ||
CR211X (retired) | ||
CR216X (retired) | ||
CR23X (retired) | ||
CR295X (retired) | ||
CR3000 (retired) | ||
CR500 (retired) | ||
CR5000 (retired) | ||
CR510 (retired) | ||
CR800 (retired) | ||
CR850 (retired) | ||
CR9000 (retired) | ||
CR9000X (retired) |
The RF304 is compatible with the RF500M radio modems, RF500B base stations, RF95(A) radio modems, RF232(A) base stations, E.F. Johnson-series radios, and P50-series radios. The RF304 is NOT compatible with the RF310M radio modem, RF310B Base Station, and RF310-series radios.
Number of FAQs related to RF304: 1
It is possible to connect two antennas to a single radio via a properly specified (operating frequency and power handling capability) two-way, 50 ohm RF power divider. One example of this type of power divider is offered by Pasternack. Note that using a device like this will induce additional losses into the system (3 to 4 dB, typically).
We've updated our privacy policy. Learn More
Update your cookie preferences. Update Cookie Preferences