Overview
The 8025 is a 3 V Coin Cell 24 mm CR2430 lithium battery.
This lithium battery is included in our CR9000(X), CR10X, and CR510 dataloggers. The 8025 powers the clock and RAM when the primary 12 Vdc power supply is not connected.
The battery should be replaced when its voltage falls below 2.4 Vdc.
Images
Specifications
| Model | CR2430 |
| Capacity | 270 mAhr |
| Self Discharge Rate | 1% of capacity per year |
| Operating Temperature Range | -20° to +60°C |
| Storage Temperature Range | -40° to +60°C |
| Diameter | 2.45 cm (1 in.) |
| Thickness | 0.3 cm (0.12 in.) |
| Weight | 4.54 g (0.01 lb) |
Frequently Asked Questions
Number of FAQs related to 8025: 1
-
The internal battery is not rechargeable. In the case of low internal battery voltage, data will only be maintained as long as a power supply is connected. Collect all data from the data logger before disconnecting the power. Then, replace the internal battery.
- For the CR800, CR850, CR1000, or CR3000 dataloggers, use the 13519 replacement lithium battery.
- For the CR5000 datalogger, use the 13497 replacement lithium battery.
- For the CR9000X and CR9000XC dataloggers, use the 8025 replacement lithium battery.
Listed Under
- TLX106 - ET Station
- CR10XM - Measurement and Control Module Only
- CR10XM-2M - Measurement and Control Module Only
- CR9000 - Measurement and Control System
- CR9000C - Measurement and Control System
- CR9000X - Datalogger Base System
- CR9000XC - Compact Datalogger Base System
- CR510-2M - Basic Datalogger with 2M Additional Memory
- ET106 - ETo Station
- CR9011 - Power Supply Module
- CR9000XDC - DC Datalogger Base System
- CR10X - Datalogger for Measurement and Control
- CR9000DC - Measurement and Control System
- CR510 - Basic Datalogger
- CR10X-2M - Measurement and Control Datalogger with 2 M Additional Memory and Wiring Panel
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences