Public PTemp_C, batt_volt
Public mux_ch, tdr_wave(5000)
DataTable (tdr_wave,true,-1)
Sample(1,PTemp_C,FP2)
Sample(1,batt_volt,FP2)
Sample(1,mux_ch,fp2)
Sample(1009,tdr_wave(),ieee4)
'' Maximum(2,tdr_wave(),ieee4,0,1)
'' SampleMaxMin(11,tdr_wave(),ieee4,0)
EndTable
'
DataTable (sec,true,-1)
Sample(1,PTemp_C,FP2)
Sample(1,batt_volt,FP2)
Sample(1,mux_ch,fp2)
Sample(409,tdr_wave(),ieee4)
'' Maximum(2,tdr_wave(),ieee4,0,1)
'' SampleMaxMin(11,tdr_wave(),ieee4,0)
EndTable
DataTable (thi,true,-1)
Sample(1,PTemp_C,FP2)
Sample(1,batt_volt,FP2)
Sample(1,mux_ch,fp2)
Sample(79,tdr_wave(),ieee4)
Maximum(1,tdr_wave(),ieee4,false,false)
' SampleMaxMin(11,tdr_wave(),ieee4,0)
EndTable
BeginProg
Scan (2,min,0,0)
PanelTemp (PTemp_C,250)
Battery (batt_volt)
mux_ch=1003
TDR100(tdr_wave(),0,1,1003,4,0.78,1000,0,100,0.3,0.085,1,0)
CallTable(tdr_wave)
mux_ch=2002
TDR100(tdr_wave(),0,1,2002,4,0.78,400,0,40,0.3,0.085,1,0)
CallTable(sec)
mux_ch=3001
TDR100(tdr_wave(),0,1,3001,4,0.78,70,0,40,0.3,0.085,1,0)
CallTable(thi)
NextScan
EndProg
the above is used to measure cable deformation, is there anything wrong with it, if not, why the data collected from the program is different from those collected from PCTDR(when TDR100 connects to PC directly). Anyone can help me out here ,thanks.