I have a problem with skipped records. The exact same program sometime works fine.
This is really weird, I use the "Compile,Save and Send" in CRbasic 2.9 and every times it compile fine in the cr1000. but maybe 80% of the time the program skip EVERY RECORDS(I see that in Station Status). The readings of my sensors are ok I can read it with Numeric data display.
Is it a timing problem somehow?
Fred
* Last updated by: FredSEP on 12/14/2010 @ 2:06 PM *
Do you have skipped scans or skipped slow scans?
I started the system yesterday and it seems it was fine for a little more than 12 hours then its started to skip records and a scan as well...
Program Errors
Skipped Scans: 1 - The scan rate may be too small.
Skipped Records in Table1: 169 - If recurring, there may be a hardware or program error.
Skipped Records in Table2: 0
Skipped Records in Heure: 3 - If recurring, there may be a hardware or program error.
Skipped Records in Min10Tmp: 17 - If recurring, there may be a hardware or program error.
Variable Out of Bounds: 0
Can you post the program or email it to me? My info is in the integrator section.