Hello,
I have wired up the CNR1 to our CR1000, but have two questions regarding proper wiring.
1. I still have a black and a white wire left over from the PT100 cable. Are these two wires not needed?
2. The wiring instructions call for jumpers between certain channels and grounds. Is using short 2-inch lengths of 18 AWG stranded wire (such as your p/n 9634) ok to use to connect, say, 3L to ground?
The following link shows a photo of my wiring instructions for the CNR1.
http://www.piercecollegeweather.com/images/1114101414.jpg
Thank you in advance for your help.
* Last updated by: piercewx on 11/15/2010 @ 11:31 AM *