Hello all,
The barometer reading in inHg is way off.
Local reading at an airport ASOS is 30.10
My station reads 14.77 hourly
Is it the multi or offset? Both locations are 27 ft above sea level.
'CS106 Barometric Pressure Sensor measurement 'BP_inHg'///////////////////////////////////////////////////
If IfTime(59,60,Min) Then PortSet(1,1)
If IfTime(0,60,Min) Then
VoltSe(BP_inHg,1,mV2500,1,1,0,_60Hz,0.240,518.1751)
BP_inHg=BP_inHg*0.02953
PortSet(1,0)
EndIf
I have tried to find an answer and cannot. Any help appreciated.
Regards
Check your Wiring:
Blue(Brown) to 1H
Red to 12V
Green to C1
Black to G
Yellow(white) to Ground
Clear to Ground
Program to provide Sea Level pressure corrected to 27 ft.
'CS106 Barometric Pressure Sensor measurement 'BP_inHg'
If IfTime(59,60,Min) Then PortSet(1,1)
If IfTime(0,60,Min) Then
VoltSE(BP_inHg,1,mV2500,1,1,0,_60Hz,0.240,500.9883)
BP_inHg=BP_inHg*0.02953
PortSet(1,0)
EndIf
I just used ShortCut which comes with Loggernet.
Thanks David! Didn't want to bother you until after the new year - you always come through.
Happy New Year!!!!