We have a ultrasonic anemometer Visala model VMT702. We want to connect the ultrasonic anemometer in a Campbell Scientific datalogger CR1000, but I don’t have idea how to program the Campbell and the wiring of the device. Do you have a sample code that I can use to get the readings?
* Last updated by: JC on 10/3/2011 @ 2:57 PM *
JC
First you have to set the device up, usual by connecting it to your computer via hyperterminal or similar and applying the settings you wish to use ie. protocol, parameters etc
Manual can be found here
http://www.vaisala.com/Vaisala%20Documents/User%20Guides%20and%20Quick%20Ref%20Guides/WMT700%20User's%20Guide%20M211095EN-C.pdf
If you want to use RS485, you will need an interface (MD485) from Campbell Sci, so try using RS232 or SDI12 to start with.
JC
First you have to set the device up, usual by connecting it to your computer via hyperterminal or similar and applying the settings you wish to use ie. protocol, parameters etc
Manual can be found here
http://www.vaisala.com/Vaisala%20Documents/User%20Guides%20and%20Quick%20Ref%20Guides/WMT700%20User's%20Guide%20M211095EN-C.pdf
If you want to use RS485, you will need an interface (MD485) from Campbell Sci, so try using RS232 or SDI12 to start with.