Field Displays / CD100
CD100 Mountable Display with Keypad
Convenience with Protection
Read data and enter instructions without opening enclosure
weather applications water applications energy applications gas flux and turbulence applications infrastructure applications soil applications

Overview

The CD100 is a mountable display with a keypad for data logger data entry and display. It has a vacuum fluorescent display for responsive use through a wide operating temperature range. You can operate it the same as the CR1000KD.

Read More

Benefits and Features

  • Without opening the enclosure, check the data logger's status, display or plot sensor readings, and stored values, as well as enter numeric data
  • Supports custom menus and displays to simplify routine operations
  • Provides water and dust ingress protection rating IP66 when installed in enclosure lid

Images

CD100
CD100
CD100
CD100 installed in an enclosure lid (part number 27814)
CD100 installed in an enclosure lid (part number 27814)
CD100 installed in an enclosure lid (part number 27814) and mounted to a pole (sold separately)

Detailed Description

The CD100 has a 16-character keypad and a display that can show 8 lines by 21 characters (64 by 128 pixels). The keypad's design permits operation with a gloved hand. Security can be set in the data logger to prevent unauthorized personnel from accessing the data.

The CD100 is both water and dust protected, providing an IP66 rating when installed in the enclosure lid.

Custom Menus and Displays

Menus for the CD100 can be customized to simplify routine operations. Viewing data, toggling control functions, or entering notes are common applications. Individual menu screens support up to eight lines of text with up to seven variables.

Specifications

Display/Keyboard Description
  • Vacuum fluorescent
  • 8 lines x 21 characters (64 x 128 pixels) display and 16-character keyboard
Keypad 16 key, alphanumeric
Interface CS I/O, SDC address 2
Power Requirements Powered from the data logger's CS I/O port.
Water & Dust Ingress Protection Rating IP66 (when installed in enclosure lid)
Temperature Range
  • -45° to +85°C (operating)
  • -50° to +85°C (storage)
  • -60° to +85°C (1 h) transit
Dimensions 17.5 x 13.7 x 3.6 cm (6.9 x 5.4 x 1.4 in.)
Weight < 0.5 kg (< 1 lb)

Current Drain
Quiescent Negligible (0.02 mA)
Active 140 mA

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Data Loggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR1000X
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR300 The CR300-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger.
CR3000 (retired)
CR310 The CR300-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger.
CR350 The CR350-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger.
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Frequently Asked Questions

Number of FAQs related to CD100: 4

Expand AllCollapse All

  1. Are custom menus displayed on the terminal interface?

    CustomMenu instructions apply to the CR1000KD, CR850, and CR3000 display. Custom menus are not displayed or passed through to the terminal interface. 

  2. Is there a way to allow a user to change constants in a CR800, CR1000, CR3000, or CR6 program without allowing the user to make other program changes?

    In OS 24 (CR6 OS 01) and later, a user can change constants from the CR1000KD or a terminal emulator without touching the program. The program must contain a ConstTable/EndConstTable construction for this to occur. Because the program does recompile, collect the data first.

  3. Can a display be put on the outside of an enclosure?

    Yes. The CD100 mounts in an enclosure door and supports all of the CR1000KD capabilities. With the CD100, historic and real-time data can be read, and instructions can be entered without opening the enclosure door.

    Other available options that display real-time data only are the CD295 and CD294.

  4. Are the CR800 and CR1000 capable of being programmed through a CD100 or CR1000KD without the use of computer software?

    Although it is recommended to use software such as Short Cut for programming, the CR800-series, CR1000, and CR3000 dataloggers can be programmed with the CD100, CR1000KD, or integrated keypads. The keypad can be used to create new programs or edit programs that already exist in the data logger memory.

    From the CD100 or CR1000KD home screen, follow these steps to get started:

    1. Press Enter. 
    2. Select File and press Enter. 
    3. Select either New or Edit. 
      • To modify an existing instruction, select the instruction, and press Enter. 
      • To add a new instruction, press Ins, and select Instruction.
Visit the FAQ Library

Listed Under

Other Accessory for the following products:
Common Accessory for the following products:

Privacy Policy Update

We've updated our privacy policy.  Learn More

Cookie Consent

Update your cookie preferences.  Update Cookie Preferences